Wera Safe-Torque A 1 Set 1 – Torque Wrench Set 1/4″ Square, 2-12Nm – 10 Pcs.

10-piece 1/4″ torque wrench set in robust textile box.

With this torque wrench with over-slip mechanism, once the set torque value has been reached, the tool cannot be over-tightened, so that applying too much torque is impossible. The setting range of 2 to 12 Nm is designed for controlled right-hand and left-hand tightening. Setting and securing the preset value is simple: the audible and tactile engagement when the scale values are reached additionally facilitates the safe setting of the desired torque value. With Torque Lock function for use as a standard ratchet without torque function. This means that the Safe Torque can also be used for rotation angle applications. The return angle is only 5°, so the ratchet can also be used in tight working situations.

Features of the Wera Safe-Torque A 1 Set 1 – Torque Wrench Set

• Slip-over release mechanism – the set torque value can therefore never be exceeded
• Torque Lock function: the torque function can be switched off – tool can therefore also be used as a standard ratchet with high loosening torques and in defined rotation angle applications
• For controlled right and left tightening – tightening and loosening with and without torque
• Simple setting and securing of the desired torque value with audible and tactile engagement when the scale values are reached
• Only 30° disengagement angle after reaching target torque value
• Thanks to the fine toothing with 72 teeth, a low return angle of 5° is possible
• 1/4″ square drive with nut locking mechanism

Scope of delivery of the Wera Safe-Torque A 1 Set 1 – Torque wrench set

1 x Safe-Torque A 1 torque wrench with 1/4″ square drive, 2-12 Nm
8 x 8790 HMA Zyklop sockets with 1/4″ drive (1x 5.5, 6, 7, 8, 10, 11, 12, 13 x 13 mm)
1 x 8794 SA Zyklop extension with quick-release sleeve, short, 1/4″ x 75 mm
1x Velcro strip 2040 (240 x 50 mm)
1 folding bag